Trouble flashing AWS-S3-PUT example to TimerCam-F with ESP-IDF + PlatformIO
-
The project compiles fine, but fails to flash, failing with the following. Has anyone encountered and resolved this?
Building in release mode Retrieving maximum program size .pio/build/m5stack-timer-cam/firmware.elf Checking size .pio/build/m5stack-timer-cam/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [= ] 11.6% (used 38052 bytes from 327680 bytes) Flash: [==========] 96.0% (used 1006333 bytes from 1048576 bytes) Configuring upload protocol... AVAILABLE: cmsis-dap, esp-bridge, esp-prog, espota, esptool, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa CURRENT: upload_protocol = esptool Looking for upload port... Auto-detected: /dev/cu.usbserial-59527C0548 Uploading .pio/build/m5stack-timer-cam/firmware.bin esptool.py v4.5.1 Serial port /dev/cu.usbserial-59527C0548 Connecting.... Chip is ESP32-D0WDQ6-V3 (revision v3.1) Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None Crystal is 40MHz MAC: b0:b2:1c:60:bf:b0 Uploading stub... Running stub... Stub running... Changing baud rate to 460800 Changed. A fatal error occurred: Unable to verify flash chip connection (No serial data received.). *** [upload] Error 2 -
@inteladata Try setting baud rate to 1500000.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login