Grove Male 2 Male adapter?
-
How do I connect the two small M5 modules with a male to male adapter? The grove cable works fine for me but I want a zero length grove male 2 male connection so I can print a 3D case and put both modules into it.
Thnx
Andreas -
@brrainz I think M5Stack are missing a trick, not having a male-male connector. I have a bunch of Neo Hex units I'd like to connect without lots of wires behind them.
-
@brrainz @erickadengler you could just try removing the connector and solder wire between each unit or now that you have a prototype made with units, look up the circuit diagrams on the site and build a custom pcb containing the devices.
Another route is to learn how to make a custom cable/connector.
BTW the connectors on the devices are male and not female and so adapters must be female not male
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login