Tab 5, how to enable Lora?
-
It appears that the tab5 is prepared to work with Lora. Any idea how?
Thanks -
Hello @HappyUser
correct, M5Tab5 has an (empty) slot on its board which takes a stamp sized expansion like CatM or LoRa or ... - see backside picture of M5Tab5.
That said, afaik at this point in time only the Stamp CatM exists. See here.
In other words, you'll need to wait until M5Stack releases a Stamp LoRa.
Thanks
Felix -
@felmue Thank you, that makes sense. Btw, a great product.
-
@HappyUser The Tab5 also has a M-BUS interface (the big 30pin socket on the back) and mounting points for the m-bus modules.
So; in theory you can 'just' plug in one of the modules from here: https://docs.m5stack.com/en/products?id=for stack-module
But in practice it will probably need a bunch of work and understanding to get the pin assignments and drivers on the tab5 aligned and working.
- There are other interesting M-BUS modules available (GPS, motor drive, prototype board, etc..)
- The tab5 has the correct threaded mounting points to make the boards secure etc.
-
@easytarget thank you. That is indeed an option. In my experience not to much work to get a Lora module working. We have a number of them in the field. But we would like the tab5 not become thicker as it is. We are now considering to place an Heltec Lora inside. Maybe that could work. Regards.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login