M5burner fail to open on MacOS. Use esptool to flash the uiflow_firmware.
-
M5burner has found compatible problems on Mac, as well as UIFlow desktop IDE. We appreciate the feedback from the users, and We apologize for the inconvenient. The R&D department team of M5Stack is now working on it. Before we have this problem fixed, if you have trouble downloading the firmware, you can use 'esptool'. Here are the steps:
1, Make sure you have 'esptool' installed on your Mac. Tutorial website:
https://github.com/espressif/esptool2, To check if have 'esptool' installed: type command esptool.py , in 'terminal'. If a display showed this, means it is installed.
3, Download uiflow-firmware: https://github.com/EeeeBin/UIFlow-Firmware , unzip.
4, At 'terminal' find directory locate directory to '.../UIFlow-Firmware-master/firmware_en'
5, Connect m5stack device via USB cable. Go inside the folder type in command ./flash.sh to start flahing
-
Can you also post this in the UIFLOW forum please.
-
Sure
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login