M5Stick C unable to upload code after clock example loaded
-
Hi,
Testing out StickC, I uploaded the clock example. However, the USB port is now no longer seen from the Arduino IDE. I also have a M5Stick (grey) and that connects fine. Is there a way to factory reset / other way to resolve this? Thanks -
Have you tried switching the stick c off and on again? May sound silly but occasionally they needs to be properly power cycled other wise connections are lost.
Another option is to use M5Burner to wipe the code from the device.
-
Hi, thanks for the reply - yep tried power off/on plus various combinations of button presses. Nothing appears to bring the USB back "on-line".
-
-
Have you tried to erase the flash memory with the M5Burner or firmware uploader inside UIFlow offline IDE?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login