Uploading to M5 Atom in Arduino?
-
In Arduino, is there an add-on (via the Board Manager) to upload to the M5 Atom?
-
@mikeh Yes you can. Please follow this tutorial by @lukasmaximus
https://www.youtube.com/watch?v=2f4biAfvC_M -
Thank you for the feedback. The M5-Atom utube tutorial breezes through the Arduino Tool tab Board Manager portion by setting it up for M5Stick-C, as there is no M5-Atom selection, but when I compile, I get āError compiling for board M5Stick-C.ā Iām using an M5-ATOM āButtonā example, and my Atom is plugged into my Windows PC USB Port. Of course, Iāve added the M5-Atom library. In Arduino under File tab Preferences Iāve included Board Manager https://dl.espressif.com/dl/package_esp32_index.json. Not sure where to go from hereā¦
-
Select esp 32 pico kit from the board list (both M5stickC and atom use this chip) and select 115200 as the baud rate. if your device doesn't show up in the listed ports you may need to install the cp210x serial com port driver
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login