Raspberry Pi and M5Stack ESP32 Cam I2C grove
-
Hi all,
I have a raspberry pi zero w connected to a M5Stack ESP 32 Cam via wifi and it works great however the ESP32 gets a bit hot and power hungry after streaming for a while. I was hoping maybe I could create a physical connection to stream the video to the Pi with and noticed the Grove connector on the ESP 32 module. I was wondering if it was possible to do it with a logic converter since it seems the grove runs on 5V and I2C and how I could do this.
Thanks in advance for any advice!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login