M5StickC-Plus is dead?
-
Hi, I have a M5StickC-Plus,
I connected it to my computer, tried the basic example "display", it worked fine. After that I moved to an example to display only text, everything was fine.30 minutes or one hour later, I couldn't upload code to the device. Arduino IDE says
"A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header"
If I connect or disconnect the device appears or disappears from the ports list.
But I can't upload code and the device doesn't do anything.
Do you have some suggestions?
Thanks
-
My stick c plus died just after 2 days during a sketch uplod .
-
@ashmumblejumble said in M5StickC-Plus is dead?:
My stick c plus died just after 2 days during a sketch uplod .
Have you tried this procedure?
https://community.m5stack.com/topic/1464/m5stickc-screen-don-t-work/8
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login