Using 6060 Push
-
Can I connect multiple 6060 push on the same RS485 bus. I see that we can set a device ID, is this stored on the device after a power cycle?
-
I see from the code the ID is stored in EEPROM, but I suspect there can only one device on the bus at a time when the address is set.
Also I suspect I would use an address other than 1, as this is the default address, set when a new device is added -
@scroggyg Neither the 6060 push or the STAMP PLC are provided with connectors. The connector type seems to be ht-3.96 4p which I can only find by importing from China. I have some PowerCAN modules which were supplied with this connector, could you please provide these connectors in future?
-
general rule for RS485 bus is the same baudrate and parity on all slave devices and each device with different slave ID, max 32 devices on one chain
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login