@ajb2k3 I have a timer camera, so I tested that. And yes, I work with a Mac.

@arno said in New Remote+ Tutorial: White screen on the smartphone, nothing is displayed yes this is now with the Uiflow 1.8.7

alternativ kannst Du auch bei [https://www.distrelec.de/de/manufacturer/m5stack/man_msa?no-cache=true&page=1&pageSize=50](link url) bestellen.

@m5stack Could you please correct the UnitCamForUIFlow firmware as follows? Set the WROOM-32 clock to XCLK=8MHz and the ov2640 clock to twice the current clock. This solution has been found by Sohtamei in the following thread; https://community.m5stack.com/topic/3649/unitcam-hw-issue-cannot-stream-video/8 Thanks a lot.

Hello, thanks for your suggestion! we will look into it.

@ajb2k3 I have an Internet connection with IPV6 dual stack lite and I create the code with Web Uiflow on M5Stach Fire i read the QR code with my IPphone and get the web page with the switch and slider, but i can't switch or dim the LDR

Do you want to program the goplus in arduino or uiflow? there is a uiflow example on the docs page https://docs.m5stack.com/#/en/module/goplus if you wish to use arduino please check out this video https://www.youtube.com/watch?v=V8rmir-Tmy8 and substitute ir pin with gpio 13

I cant be 100% over this but it looks to be stock old firmware. I broke mine this week so been researching how to build a new one using updated firmware and TMC2209 drivers.