M5StickC - Can't access USB Mode
-
I just recieved my M5StickC a few days ago. Since then I'm trying to figure out how to access usb mode in order to upload my code. Unfortunately the steps listet in the manual (https://docs.m5stack.com/#/en/quick_start/m5stickc/m5stickc_quick_start_with_uiflow) don't work. On boot the stick shows an M5 animation and then switches to the MPU6886 screen.
Buttons A and B are both only cycling through the preinstalled "apps". Holding button B and hitting the restart button only starts the stick in "Test Mode" with a few more apps available, but the settings menu is not available.
Because of this I can't use the device, what is really annoying me right now. Does anyone know how to actually get into the settings menu or had similar issues?
Thanks in advance!
-
Probably you have installed factory test firmware written in c/arduino which doing only what you described in your post. You must flash device with uiflow firmware. Then you could run your stickc in app mode or programming mode.
-
@capatinshimapan When you switch on the StickC after burning the firmware you need to immediatly press the "A" button to access the setting menu.
In the setting press button a to go into mode and be to move to usb mode and press a to select usb mode.
Press the reset button and it should boot into usb mode.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login