How to erase M5Stick-C completely?
-
I have a M5Stick-C and played around with it a while. I flashed it with UI Flow 1.7.2 and tried to flash with 1.4.5 after that. It doesn't work I get the message that it doesn't have enough memory. Even the Sketch "Factory Test" isn't flashable using Arduino IDE: Not enough memory! I tried to erase the chip with M5Burner 2.2.4 and got the following message:
Erase now
esptool.py v2.5.0
Serial port /dev/tty.usbserial-FD51B432F3
Connecting....
Detecting chip type... ESP32
Chip is ESP32-PICO-D4 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse
MAC: 24:a1:60:54:44:dc
Uploading stub...
Running stub...
Stub running...
Erasing flash (this may take a while)...
Chip erase completed successfully in 2.0s
Hard resetting via RTS pin...Erase Successfully
It seems to be ok but the result is as before. How can I erase the chip COMPLETELY?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login