new m5stack: Failed to write to target RAM (result was 01070000)
-
Same here - Have You found any solution?
-
This was a known issue with Big Sur (something related to the python and / or serial port implementation in Big Sur.
I did contact M5Stack support but no solution has ever been found.
I gave up and reverted back to Catalina and it worked fine again.
Now I just installed the latest Monterey but haven't tested the Core2 yet.
In the meantime I was also using a windows computer.... -
@erich I'm on Mojave 10.14 and problem still exists :/
-
I’m actually getting it with Catalina
-
Has anyone managed to get the core 2 to work with an M1 mac? I think that you do not need the driver for the m1? With a m5stick C it works fine, but not with the core 2
-
I have the same issue when I use the M5Stack ESP32 Downloader.
However when I use a simple M5Stack Atom Matrix, its works fine.I am on OSX Big Sir.
I feel like the issue is related to the CH9102 chip on the ESP32 Downloader where the Atom has the CP2104 I think.
This theory is supported by this article here:
https://blog.squix.org/2021/08/ch9102-driver-issues-failed-to-write-to-target-ram.htmlConfirmed, installing the driver from this thread here worked for me
https://github.com/Xinyuan-LilyGO/LilyGo-T-Call-SIM800/issues/139 -
@exie said in new m5stack: Failed to write to target RAM (result was 01070000):
I have the same issue when I use the M5Stack ESP32 Downloader.
However when I use a simple M5Stack Atom Matrix, its works fine.I am on OSX Big Sir.
I feel like the issue is related to the CH9102 chip on the ESP32 Downloader where the Atom has the CP2104 I think.
This theory is supported by this article here:
https://blog.squix.org/2021/08/ch9102-driver-issues-failed-to-write-to-target-ram.htmlConfirmed, installing the driver from this thread here worked for me
https://github.com/Xinyuan-LilyGO/LilyGo-T-Call-SIM800/issues/139I guess you're right as I noticed on banggood/ aliexpress some products using this CH9102 chip are tagged as not Mac compatible.
-
@mackone try connecting the downloader's 3V3 to Stamp Pico's 5V
-
I found a solution that works on Montery :-)
Make sure you follow the PDF instructions, this works M1 Mac M5 Epaper
-
@parahooner Very many thanks for posting this, it completely resolved the problem.
-
I still have the same problem with 5 new M5Fire on Big Sur. Two older ones burned succesful.
-
@drjakob Check which USB driver is in the new cores as the driver chip was changed due to the part shortage.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login