UIFlow infinite loop and code reload
-
Hello,
After creating an infinite loop in UIFlow, and executing it. I am unable to then execute new code subsequently. UIFlow says 'Execute code successfully', but state of the device does not change. The only solution I found was to power-cycle the device. Are there any software workarounds?
HW: Atom Lite.
SW: v1.12.9
WEB: 2023.12.8 https://flow.m5stack.com/ -
You need to add a while loop which is the yellow main program loop and code needs to be placed in that
You should be using a button loop for this. -
Hi @b0rscht ,
You should add this loop (yellow color) because it has included a 2ms delay or you use to while loop inside add the 2ms delay
(OR)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login