-
I've executed flash.sh command. but catch following error.
$ cd M5Burner-flow-only/firmwares/M5Flow/v1.1.0-en $ ./flash.sh usage: esptool write_flash [-h] [--erase-all] [--flash_freq {keep,40m,26m,20m,80m}] [--flash_mode {keep,qio,qout,dio,dout}] [--flash_size FLASH_SIZE] [--spi-connection SPI_CONNECTION] [--no-progress] [--verify] [--compress | --no-compress] <address> <filename> [<address> <filename> ...] esptool write_flash: error: argument <address> <filename>: Detected overlap at address: 0x160000 for file: spiffs_image_0x170000.imgwhy?
firmware version: v1.1.0-en
hardware: M5Stack Basic
pc os: macOS MojavePlease give me some advice.
thanks. -
Because you forgot to pass the additional parameters required to make it work.
There is a slightly better version with a visual front end that can be downloaded from withing UIFlow but you need to disable the download security first using
sudo spctl --master-disable
you then download the firmware loader and run it to install the firmware (you need to erase the ld firmware first before installing the new)
and then type
sudo spctl --master-enable
to reset the system security.Only do this when downloading the uiflow firmware program!
-
sorry, i forgot to modify the mac file, need change flash.sh address 160000 -> 170000
-
While you are at it, please update the entire zip file for the Mac version of the M5Burner. What is linked in flow.m5stack.com today only goes up to v1.0.1. I need v1.1.0 please.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login