Arduino Export binary names changed (m5stick_c_plus to m5stack_stickc_plus) why?
-
I've been using the export binary from Arduino for a couple years. These are put on a server so an OTA can occur.
To my surprise, I made some changes, repeated my process - but the update never happened.
That's when I found out the name of the binary file was changed from:
m5stick_c_plus to m5stack_stickc_plusI haven't found any documentation on the name of the binary, but I assume it related to the board (and mine is still: M5StickCPlus).
I had been using library 2.0.4 but then upgraded to 2.0.7
and now I see the version changed to: 0.4.3
And the web page says to use the M5Unified version. For me that's
a bridge too far right now.Arduion is version 1.8.19
Is there any documentation on the versions and how the binary names are created? I did just see this (thanks). https://docs.m5stack.com/en/platform
I especially need to have a binary that is the same memory configuration as my 2.0.4 M5 and ESP32 since the OTA has to work for 100's of installed versions.
thanks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login