M5stickC and VL53L1X sensor GROVE port

[cepics]

Hi, is it possible to connect VL53L1X sensor to M5StickC on GROVE port?
I dont know how to set sda and scl pins of the GROVE... maybe with Wire1 ??
I'm using arduino IDE
this code doesn't work..

#include <M5StickC.h>
#include <Wire.h>
#include <VL53L1X.h>
VL53L1X sensor;


float accX = 0;
float accY = 0;
float accZ = 0;

int cm;
int feet;
int inches;
int INCHES;
bool unit = 0;

#define TFT_GREY 0x5AEB // New colour

void setup() {

  M5.begin();

  Wire.begin();
  Wire.begin(32, 33); // (SDA, SCL) grove stickC
  Wire.setClock(400000); // use 400 kHz I2C

  M5.Lcd.setRotation(3);
  M5.MPU6886.Init();

  sensor.setDistanceMode(VL53L1X::Long);
  sensor.setMeasurementTimingBudget(50000);
  sensor.startContinuous(50);

}

void loop() {
  M5.MPU6886.getAccelData(&accX, &accY, &accZ);

  if (accX < 0) {
    M5.Lcd.setRotation(3);
  } else {
    M5.Lcd.setRotation(1);
  }

    cm = (sensor.read() / 10); //CM
    inches = cm / 2, 54;
    feet = inches / 12;
    INCHES = inches % 12; //es x = 7% 5; // X ora contiene 2


  M5.Lcd.fillScreen(TFT_GREY);
  M5.Lcd.setCursor(10, 16);
  M5.Lcd.setTextColor(TFT_YELLOW);
  M5.Lcd.setTextFont(7);
  //M5.Lcd.println(12.10);
  M5.Lcd.println(cm);
  delay(100);
}

tnks a lot

[cepics]

nobody?

[ajb2k3]

Have you tried this code sample yet?
https://github.com/m5stack/M5-ProductExampleCodes/blob/master/Unit/TOF/Arduino/TOF_VL53L0X/TOF_VL53L0X.ino

BTW there is a new TOF Hat for the stick C

https://m5stack.com/collections/all/products/m5stickc-tof-hatvl53l0x

[wikistik]

@cepics said in M5stickC and VL53L1X sensor GROVE port:

VL53L1X

I tried the VL53L0X unit on the grove port of the stick several times and could not get it to work. I know that really doesn't really help you but at least your are not alone in this quest :)