UIFlow Desktop can't connect to M5Stick
-
When i try to connect UIFlow Desktop (on Debian Linux) via USB to my M5Stick always this message appears:
Upload code failed, maybe your device is offline check it and retryand the statusbar shows
/dev/ttyUSB0[ Disconnected ]But the FirmwareBurner works well. Also i can use a serial connection (like
screen /dev/ttyUSB0 115200) to communicate successfull with my M5Stick (Micropython-REPL). So drivers are not the problem. I also tried this as root - same behavior..
Only the UIFlow connections to the USB isnt working.Of course I could use UIFlow online. In our school environment no internet connection is possible.
Thanks for your support
-
M5Stick? M5StickC? which product are you used ? UIFlow Desktop IDE don't support M5Stick. if you are using M5StickC, you should setup it the USB mode then , it can connect to the IDE.
tutorial :
https://docs.m5stack.com/#/en/quick_start/m5stickc/m5stickc_quick_start_with_uiflow
-
Check out this video I did a while back on using M5Stack devices on linux https://www.youtube.com/watch?v=ZZdTl0400uM you need to make sure to add the device to the dialout group, I can't remember the exact line of code but it's in the video if you watch it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login