Tab5 RS485 connector
-
The Tab5 has a 6 way connector that includes the RS485 signals, but none of the cables I have fit it - it's quite a fine pitch. The docs don't mention it. What is the type of connector?
TIA, Clyde
-
Hello @clydeps
I don't know the pitch of the connector. However my M5Tab5 came with a matching cable. Maybe double-check your box?
Thanks
Felix -
Yeah, thanks - I dug through my waste basket and found the box it came in - the cable was hidden inside the packaging. I believe it's 1.25 pitch.
-
cable is well hidden in Tab5 box, good to know you found it
-
I do think it is too fragile to be of any practical use, I am trying to surface mount a TAB5 in a 3D printed bezel but as all the other connections are on the side, it isn't easy
-
@scroggyg I had the same question, so I looked into it and found out it's a Molex PicoBlade 6-pin. It’s sometimes called "Micro JST", but it's really a 1.25mm pitch Molex connector.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login