About Hat 8servos
-
I trying m5stickC+Hat 8servos, when I use UiFlow blocky code, it not work!
But I use arduino code, it work.
UiFlow version is 1.4.2 -
Can you share a screen shot of you UIFlow code please?
-
-
I record a mp4 video. The RGB worked but Servo not.
https://youtu.be/iymi3ziUE7M -
if you put pressure on the servo horn, does the horn move?
-
@ajb2k3 said in About Hat 8servos:
pressure
When the program is executed, the pressure on the servo horn is rotatable.
-
@coffeeworm
Sounds like your not getting power. -
@coffeeworm said in About Hat 8servos:
@ajb2k3 said in About Hat 8servos:
pressure
When the program is executed, the pressure on the servo horn is rotatable.
as @Xeon replied, you dont have power to the servos. is the power switch in the correct position?
-
@ajb2k3 said in About Hat 8servos:
you dont have power to the servos. is the power switch in the correct position?
Yes,the power is switch in the correct position.
I am sure that it is not a power problem. -
I found a solution, I have to set it up first, then the servo can work.
Thank you for your response. -
Ah, that is worth Knowing thanks.
I haven't got one yet so didn't know that they needed a "Initial Position" set up.
Thank you for working this out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login